Management System

1. Introduction

This document describes SYSTEM related configuration and get of status information.

2. Reading the Vendor hardware information.

The Vendor can specify a string with information about the hardware like PCB and Switch device ID and revision.
This can read out.

FETCH request message.

- "/ietf-system:system-state/platform/machine"

FETCH response message.

- "/ietf-system:system-state/platform/machine": LAN969x - ev23x71a (pcb8398)

The Switch is a LAN969x product and the board is a ev23x71a (pcb8398).

3. Copy running configuration to startup configuration.

The running or current configuration can be save as the configuration loaded during next boot of the system.

POST request message.

- "/mchp-velocitysp-system:save-config":